2-Wire RS485 Surge Protector (Industrial / Passive) – CommFront

The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced to the RS485 data lines. This industrial RS485 surge protector features 3-stage surge protection – Gas Discharge Tubes (GDT), protection resistors, and Transient Voltage Suppressors (TVS) - for maximum protection. The SPD-485-1 is designed to connect in series to the input of the protected equipment; when a high-voltage surge is introduced into the input, the GDT conducts electric current after becoming ionized, which in turn discharges the high-voltage surge to the earth ground. The excessive voltage will be further clamped to a safe range that the equipment can accept by the TVS. This industrial 2-wire RS485 surge protector features passive circuitry designs and thus requires no external power; it supports data rates up to 10Mbps and can be used

RS485 Hub 2-Port Active Industrial Grade RS485 Two-Port Dual-Channel Hub with Photoelectric Isolation and Lightning Protection - China Serial Port RS-232/ RS-485, 2 Port RS 485 Interface Converter

COMMFRONT Industrial 4-Wire RS422 / RS485 / RS232 Surge Protector, Passive, 3-Stage Surge Protection, DIN-Rail Mount : Electronics

MT-RS485 - Surge protection device - 2762265

The HUB-485-4 is a rugged, industrial-grade, optically-isolated RS485 Hub / Splitter / Repeater, which can be used to expand RS-485 networks by

Opto-Isolated RS485 Hub / Splitter (Industrial)

RS485 Hub 2-Port Active Industrial Grade RS485 Two-Port Dual-Channel Hub with Photoelectric Isolation and Lightning Protection - China Serial Port RS-232/ RS-485, 2 Port RS 485 Interface Converter

RS485 Surge Protector at Rs 550/piece, Kurichi, Coimbatore

RS485 to TTL Converter / TTL to RS485 Adapter

Collections – CommFront

Data Surge Protector SPD FSP Indoor RS-232, RS-422, Sense Loops Screw Terminal SASD 120 V

SWD GmbH, Hard-+Software Distribution, CFR-SPD-ETH-1

RS485 Surge Protector at Rs 550/piece, Kurichi, Coimbatore

The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced

2-Wire RS485 Surge Protector (Industrial / Passive)

SWD GmbH, Hard-+Software Distribution, CFR-SPD-ETH-1

Signal & Data Surge Protection Device SPD RS485 RS422 RS232